Processing capability and QoE driven optimized computation offloading scheme in vehicular fog based F-RAN

World Wide Web - The Fog Computing was proposed to extend the computing task to the network edge in lots of Internet of Things (IoT) scenario, such as Internet of Vehicle (IoV). However, the...     

Spatial Relationships of Water Resources with Energy Consumption at Coal Mining Operations in China

Mine Water and the Environment - The spatial characterization and regional differences of water use in China’s coal mines were investigated based on a high spatial resolution mine site...     

基于彩色图像处理的浮选尾煤灰分软测量研究

浮选尾煤灰分是浮选产品的一个重要指标。针对选煤厂浮选尾煤灰分多采用离线检测而无法实现在线准确测量，以及当前浮选软测量多采用单一的灰度图像从而导致软测量模型精度及适应性较差的问题，提出了一种基于彩色图像处理的浮选尾煤软测量方法，建立了基于最小二乘支持向量机(LSSVM)的浮选尾煤灰分软测量模型。模型以不同颜色空间的彩色特征、灰度均值以及浓度特征为输入变量，以尾煤灰分作为输出变量，采用粒子群优化算法对LSSVM模型参数进行优化。结果表明：所建立的尾煤灰分软测量模型可以较好地实现浮选尾矿灰分的在线预测，引入浮选尾矿图像的彩色特征可以提高尾煤图像分析的精度，预测精度达96.89%。研究成果在柳湾选煤厂现场应用，并取得了较好的尾矿灰分测量效果。     

Microwave dielectric properties of SrLa[Ga1−x(Mg0.5Ti0.5)x]O4 and SrLa[Ga1−x(Zn0.5Ti0.5)x]O4 (x = 0.2-0.8) ceramics

SrLa[Ga_1−x(R_0.5Ti_0.5)_x]O₄ (R = Mg, Zn) ceramics were prepared by a standard solid state sintering method. The single-phase ceramics with K₂NiF₄-type layered perovskite structure and I4/mmm space group were obtained, indicating that SrLa(R_0.5Ti_0.5) and SrLaGaO₄ can form the unlimited solid solutions. With increasing x for R = Mg and Zn, ε_r increases monotonously, the Qf value first increases and then decreases, while τ_f increases from a negative to a positive value. The optimized microwave dielectric properties were obtained as following: ε_r = 23.3, Qf = 89 400 GHz, τ_f = −0.8 ppm/°C for SrLa[Ga_0.6(Mg_0.5Ti_0.5)_0.4]O₄ and ε_r = 23.3, Qf = 76 200 GHz, τ_f = 0.2 ppm/°C for SrLa[Ga_0.7(Zn_0.5Ti_0.5)_0.3]O₄, indicating that the present solid solution ceramics are the promising candidates as microwave resonator materials for the telecommunication applications.     

影响高空探测质量的原因分析及措施

高空气象探测系统具有较高的探测精度和自动化程度。文章通过对高空探测中影响探测的重放球、迟放球原因的分析,结合工作实践,总结了雷达、计算机、基测箱、探空仪等在运行过程中出现的问题,并提出具体的解决方法,实践证明运行效果显著,为业务人员提供参考。     

一种数字式高温燃油控制阀的特性研究

该文提出了一种数字式高温燃油控制阀,可以实现对高温燃油的连续精确控制。首先,针对高温的恶劣工况,进行了方案设计,包括前置级伺服阀的选用、主阀阀口的设计、整阀的冷却设计,介绍了其结构组成及工作原理;之后分别对高温阀的热特性和控制特性进行了仿真分析,结果表明该方案的高温阀能够满足设计要求。     

地浸铀矿山浸出速度的影响因素

在地浸铀矿山生产过程中,铀的浸出速度是制约生产的重要参数,直接关系到矿山的服务年限。矿山生产采区往往存在严重的拖尾现象,为提高地浸铀矿山资源利用率,降低生产成本,研究了影响铀浸出速度的因素,提出了控制铀浸出速度的措施。     

Aptamer-Functionalized Nanoparticles in Targeted Delivery and Cancer Therapy

Using nanoparticles to carry and delivery anticancer drugs holds much promise in cancer therapy, but nanoparticles per se are lacking specificity. Active targeting, that is, using specific ligands to functionalize nanoparticles, is attracting much attention in recent years. Aptamers, with their several favorable features like high specificity and affinity, small size, very low immunogenicity, relatively low cost for production, and easiness to store, are one of the best candidates for the specific ligands of nanoparticle functionalization. This review discusses the benefits and challenges of using aptamers to functionalize nanoparticles for active targeting and especially presents nearly all of the published works that address the topic of using aptamers to functionalize nanoparticles for targeted drug delivery and cancer therapy.     

水性锈转化涂料的制备及性能

采用苯丙乳液与改性苯丙乳液共混作为成膜物质,以单宁酸为转锈剂,柠檬酸为配位剂,焦性没食子酸为转锈促进剂,再加入成膜助剂、有机胺类缓蚀剂、渗透剂等,制备了一种可应用于带锈钢材的水性锈转化涂料。通过正交试验和单因素试验确定了涂料的最优配方为:成膜物质65%,转锈剂5%,转锈促进剂2%,缓蚀剂0.6%,渗透剂2%,配位剂0.5%,成膜助剂1.6%,蒸馏水余量。采用塔菲尔极化曲线测量、中性盐雾试验和盐水浸泡试验考察了漆膜的耐蚀性。结果表明,所制水性锈转化涂膜可耐盐雾96 h,耐盐水浸泡168 h,且耐酸性较强,在pH为2的3.5%NaCl溶液中有保护作用。与两款市售涂料相比,该自制水性锈转化涂料具有更好的耐蚀性。     

早冠丝瓜406新品种的选育

早冠丝瓜406是以S4为母本、X06为父本配制而成的一代杂种.极早熟,植株主蔓分枝性强,生长性强盛;雌花节位低,首朵雌花着生于主蔓第5节~7节,采收期为播种后58 d^60 d开始;嫩瓜呈长棒形,果端较圆,果皮深绿色,单果重0.5 kg^0.9 kg,果实纵径42 cm^50 cm,横径3.7 cm^4.2 cm,前期产量为16772.0 kg/hm^2,总产量可达47447.5 kg/hm^2.适合长江流域、云贵高原及湖南地区早春设施和露地栽培.